In order to protect shoes and ensure their longevity, it is important to know the different ways to clean them. Improper shoe care can lead to irreparable damage. Find out how to guard against this and learn about the proper methods of cleaning sneakers.
Which shoes can we wash in the washing machine?
It all depends on what type of shoe you are trying to wash. Each shoe model consists of different materials, which are not always machine washable.
Cloth or mesh sneakers can be washed in the washing machine. Leather, grain and suede shoes are not washable due to the delicate material.
Do not wash shoes that are glued together, because the glue can dissolve when exposed to temperature. This can, for example, cause the sole to peel off or unsightly glue stains on the upper. Don’t put shoes with decorations in the washing machine, such as sequins, as they may fall off.
Remember also that the washing of shoes is done at your risk. A given manufacturer during a shoe claim may consider that a pair has been misused. Modern washing machines already have programs that allow you to wash your sneakers, while the interference of any chemicals or high water temperature can be visible to the naked eye, which can damage the broad structure of the shoe.
How to properly wash sneakers in the washing machine?
It is important to run the right washing program and choose the right temperature. Sneakers should be washed at a lower temperature than clothes. The safest option is to choose a temperature of 30°C, and when it comes to the program it is 400 revolutions per minute.
As a cleaning agent, it is best to use washing powder or gel. Remember not to add fabric softener. When washing white sneakers, apply a small amount of baking soda and water to them for a few minutes to improve the end result thanks to the bleaching properties of soda.
Before putting your shoes in the washing machine, remember to remove any sand or mud from them so as not to clog the washing machine.
It’s a good idea to put your sneakers in a special mesh laundry bag to reduce bouncing from the washing machine drum. You can also wash them with towels or blankets for added shoe protection. Additionally, remove the insoles and laces and wash them separately.
How to dry sneakers properly?
Shoes should dry naturally. This may take a little longer, but is most beneficial. How to dry shoes safely? Put newspapers inside to support the cut and make sure the shoes do not collapse. On top of that, newspapers will effectively draw out moisture. Place the shoes in a dry, cool place and wait for them to dry naturally.
This can take several hours. If you want to speed up the process, you can use a hair dryer. Use the lowest gear mode with a cool air supply. However, do not use this method for leather shoes, as it can leave stiff dents and bumps.
You should not dry your shoes in the sun because it causes the colors to fade. Also, drying your shoes under a radiator exposes them to deformations such as cracking or spilling of the material when exposed to heat. Also avoid the tumble dryer which can damage shoes when they bang against the drum.
It is best to dry the shoes in a shaded and cool place. Such drying may take several hours but it is the most effective method.
To keep the shoe in shape, put a ruler or newspaper inside. Newspaper speeds up drying by drawing moisture out of the shoes.
What products should I use to hand wash my shoes?
If you want to wash your shoes by hand it is important to choose the right cleaning products.
You will need a brush with soft bristles and a special cleaning fluid. In this case, we recommend Crep Cure Travel.
How to clean your sneakers with Crep Cure Travel?
This kit contains everything you need. A soft brush, cleaning fluid for all types of materials and a cloth to wipe away dirt. All you need to do is add lukewarm water and you can get down to removing dirt.
- Remove the insoles and laces. This will allow you to clean both more thoroughly.
- Add the cleaning liquid to lukewarm water and mix. This will create a solution for cleaning shoes.
- Dip the brush into the solution and gently rub the shoes with it in a circular motion. Do not rub too hard to avoid damaging your shoes.
- Finally, wipe off the dirt with a cloth.
- Allow the shoes to dry. Don’t expose your shoes to the sun! This can lead to their shrinking. It is important to leave them in a shaded area.
- Wash the shoes again if necessary.
What products should I use after cleaning my shoes?
After cleaning your favorite pair of shoes, you want the cleanliness to be preserved for as long as possible. Crep Protect 200 ml shoe preservative will help.
Nanotechnology was used to create the spray, which reflects dirt and water. The coating it produces prevents liquids from penetrating the sprayed material. The product can be applied to any type of material.
How to use Crep Protect waterproofing?
It is important that there is no dust or other dirt on the shoes. This will allow the waterproofing to work most effectively.
Before applying the spray to the entire surface of the shoes, spray the least visible part of the shoe to check that the material will not be discolored or leave marks.
If everything is fine, spray the shoes from a distance of 30cm. Leave them for 10 minutes and perform this action again. One spray application is enough for up to two weeks.
Sneaker dirt and deep cleaning
In an emergency, Crep Protect Wipes will help you.They will allow you to remove superficial dirt from walking.
Each cloth is packed in an airtight container so they do not lose their properties. They have two layers.
One rough for removing dirt such as soil and a smooth one for stains. Thanks to their size, they will fit in your pocket and will always be with you.
No products in the basket. 